This video walks you through the following steps in the installation process:

  1. Locate the vehicles OBD-II port, and ensure proper voltage.
  2. Free up existing OBD-II port.
  3. Assemble mounting bracket, and connect the OBD-II Pass-Thru Cable to the vehicle’s OBD-II port.
  4. Mount the replacement OBD-II port, and pull cable through the dash.
  5. Install the external antenna, and route the cables.

  7. Tape off all unused wires and connect the vPOD to harness AUX 1.
  8. Locate ignition source and connect 20-pin harness white wire.
  9. Since the publication of this video, steps 6 and 7 of this installation process have changed. Please review the vPOD White Wire insert before you install your device.
  10. Connect the antenna cables to the device.
  11. Connect the harness and mount the device.
  12. Connect the vPOD to the OBD-II Pass-Thru Cable.
  13. Verify installation, and tamper-proof remaining connections.
This entry was posted in   .
Bookmark the   permalink.